Technical Guides   • ICP Operations • Reliable Measurements • Sample Introduction for ICP-MS and ICP-OES • Elemental Analysis of Zeolites • Silver Stability Facts • Pure Chlorite Developed by IV Mercury Stability Facts • Part-Per-Billion Stability Study • Understanding Error Budgets     Consumer Guides   • Flexible Expiration Dates? • Investigate Credentials Before You Buy • What Makes a Site Secure? • Hazardous Shipping Guide • Certificate of Analysis Components • Expiration Facts You Should Know • Regulating Hazardous Materials • Credit Card Advantage • Shelf Life vs. Expiration Date     Quality Management   • NIST Traceability • ISO Simplified • Transition From QS-9000 to ISO/TS 16949:2000 • Lean Operations to Trim Expenses • Impressions of Southeast Asia's Quality System     Editorials and More   • New Evaporation Device Shows Promise • Site More Friendly to Users • Industry After September 11th • Ion Chromatography SRMs in Danger

The stability of mercury-containing solutions has been a topic of concern for all trace analysts performing Hg determinations. Our in-house stability studies have yielded the following conclusions.

Hg Stability

1. Hg is stable in glass (only borosilicate glass studied) in 5% nitric acid at room temperature at all concentrations studied ( 0.05 to 1000 µg/mL) for 1 year.
   
   
2. Hg is stable in glass (only borosilicate glass studied) in 5% nitric acid at 4°C at 0.05 µg/mL for 14 months.
   
   
3. Hg is stable in glass (only borosilicate glass studied) in 5% nitric acid at room temperature at 5 µg/mL for 2 years and 8 months.
   
   
4. Hg appears to be stable in 10% v/v HCl in LDPE. A detailed stability study is in progress for 10% HCl Hg containing solutions.
   
   
5. Hg is stable in LDPE in a water / 5% absolute nitric acid matrix for at least 5 months.
   
   

Hg Instability

1. Hg is not stable in MEBs containing Sb at the Tartrate.
   
   
2. Hg standards at 0.1, 1.0, 5, 10 and 100 µg/mL were studied in LDPE and it was found that Hg is lost. The loss at the 100 µg/mL is relatively small.
   
   
3. Hg looses up to 1 µg/mL Hg in LDPE over time. Therefore, Hg standards < 100 µg/mL should be packaged in borosilicate glass with a 5% nitric acid matrix.
   
   
4. The most dramatic result of Hg loss:
   In a comparison of 5 µg/mL Hg standards in 5% nitric acid stored at room temperature in glass and LDPE over a period of ~ 2.5 years, it was found that the glass was stable. The LDPE container lost greater than 99% of the Hg indicating amounts of Hg > 1 µg/mL can be lost in LDPE with time.
   
   

Analytical Properties of Hg

Chemical Compatibility:  Stable in HNO₃. Avoid basic media forming insoluble carbonate. The sulfide, basic carbonate, oxalate, phosphate, arsenite, arsenate, and iodide are insoluble in water.

Stability:  2-100 ppb levels - stable in 10% HNO₃ packaged in borosilicate glass; NOT stable in 1% HNO₃ / LDPE container. 1-100 ppm levels stable in 7% HNO₃ packaged in borosilicate glass. 1000-10,000 ppm solutions are chemically stable for years in 5-10% HNO₃ / LDPE container.

Hg Containing Samples (Preparation & Solution):  Metal (soluble in HNO₃); HgO (soluble in HNO₃); Ores and Organic based (our documentation has more references to the preparation of Hg containing samples than any other element -- because these preparations are prone to error, we recommend you contact our technical staff at ivtech@ivstandards.com or (800) 569-6799 and we'll provide you with the necessary data for your specific sample type).

Visit our Analytical Periodic Table for the analytical properties of over seventy elements.