Technical Guides   • ICP Operations • Reliable Measurements • Sample Introduction for ICP-MS and ICP-OES • Elemental Analysis of Zeolites • Silver Stability Facts • Pure Chlorite Developed by IV • Mercury Stability Facts • Part-Per-Billion Stability Study • Understanding Error Budgets     Consumer Guides   • Flexible Expiration Dates? • Investigate Credentials Before You Buy • What Makes a Site Secure? • Hazardous Shipping Guide • Certificate of Analysis Components • Expiration Facts You Should Know • Regulating Hazardous Materials • Credit Card Advantage • Shelf Life vs. Expiration Date     Quality Management   • NIST Traceability ISO Simplified • Transition From QS-9000 to ISO/TS 16949:2000 • Lean Operations to Trim Expenses • Impressions of Southeast Asia's Quality System     Editorials and More   • New Evaporation Device Shows Promise • Site More Friendly to Users • Industry After September 11th • Ion Chromatography SRMs in Danger

Three levels of ISO - Guide 34 is the pinnacle

We've entered an age when quality has become imperative in the arena of high tech industry. The International Standard Organization (ISO) has provided a level playing field for all manufacturers to officially state the quality of their products and business practices.

ISO 9001:2000, ISO 17025:2005, and ISO Guide 34:2000 are the three most valuable certifications for standard manufacturers. What do these credentials really mean?

1st Level - ISO 9001:2000

• Certifies that a company has official written procedures and training documentation in the areas of customer service, product design, manufacturing, analysis, certification, packaging, shipping, and accounting.
• This credential is very customer service oriented. Every complaint is documented and corrective and preventative measures must be put into place.

Bottom Line:
As long as a company is consistent in its documented actions, it can remain ISO 9001:2000 certified.

2nd Level - ISO 17025:2005

• Certifies that quality-oriented tests are performed correctly. These tests establish that the product is indeed a quality product.
• All aspects of quotations and contracts, the Research and Design operation, and Manufacturing and Quality Control activities are examined by this standard. The qualification, education, and training of all associates are scrutinized against their job responsibilities. Even the qualifications of vendors and collaborators are checked, as well as every Quality Critical specification and purity requirement.

Bottom Line:
To be ISO 17025 certified, a company must not only be consistent, but must also be proficient in testing the quality of their products.

3rd Level - ISO Guide 34:2000

• This is an accreditation that deals directly with Certified Reference Material (i.e. - chemical standard) Manufacturers.
• All methods that the Manufacturer uses to certify their standards must be validated and proven to be accurate.
• Requires that an "uncertainty", which includes all of the sources of error involved in certifying the standard, be reported on the Certificate of Analysis. Furthermore, the Certificate of Analysis itself must observe stricter requirements imposed by the ISO committee.

Bottom Line:
Guide 34 provides the highest level of quality assurance, confidently stating that the manufacturer's standards are produced correctly and competently.

Inorganic Ventures is accredited to all of the above certifications. For further details, review our credentials.