We Flex to Your Specs
Order Order Register
Consider Inorganic Ventures for all your inorganic standard needs. Contact info at end of document.
Return to Web Version »
Products & Services
Resources & Support
Contact us Email us
Sample Preparation
Fusion of Titanium Dioxide and Potassium Pyrosulfate Iron Oxide Pigment Analysis by ICP Dissolving Graphite to Measure by ICP Quartz Powder Preparation XRF vs. ICP for Concrete Metals Dissolution of Si in Metals Analysis of Sediment Samples for Cs Reactions of Sulfur and Bromine Determination of As in Sediment Matrices for Soil Preparation Trace Metal Analysis of Air Condensate Analyzing the Mineral Composition of Concrete Determination of Hg in Sediment Low-Alloy Steel Analysis by ICP Analyzing for Br by ICP Analytical Tips for Tin Analyzing Silicone Oils Ashing Technique for Metals Coal Sample Digestions Ashing Procedure For Tin Using Blue HDPE Containers Tin and Thallium Soil Extraction Filter Papers for EPA Method 353.2 Determination of Hg in Biological Matrices
Home Tech Center Tech Center Ask the Experts Ask the Experts Sample Preparation Sample Preparation Determination of Mercury in Sediment Determination of Mercury in Sediment
Print Print Tell Share Bookmark & Share
More Advice from the Experts
More Advice

Determination of Mercury in Sediment

Advice by Paul Gaines, Ph.D.

Jody had a number of solutions that were extracted from small river sediment samples (<50mg) using a sequential digestion. The extracts had been preserved in 0.5% BrCl or 5% Aqua Regia + 0.01% potassium dichromate in order to preserve Hg for analysis by atomic fluorescence. She wanted to try to determine the concentrations of other trace elements (particularly the Lanthanides) by ICP-MS. Jody wondered if her proposed preparation method (see below) would work and whether Paul could offer some additional advice.

Dear Jody,

HDPE is not stable to strong oxidizers like Aqua Regia and BrCl. I would suggest using PFA or PTFE Teflon containers. In addition, these containers can be heated for your evaporation. Be sure to acid leach the containers with nitric acid before using, since new Teflon is not as clean as polyethylene.

Regarding your planned method:

"I plan to evaporate the samples and make them up in 1% nitric in order to minimize the bromide and chloride interferences."

I believe this method of evaporating your samples and making them up in dilute nitric acid will work for you. You may want to add some concentrated nitric acid before evaporation.

Please feel free to contact me with any questions or comments.

Serving you in chemistry,
Paul R. Gaines Paul R. Gaines, Ph.D.
CEO of Inorganic Ventures & Fellow Chemist

DISCLAIMER: Advice offered by the chemists at Inorganic Ventures is intended for the individual posing the question. Feel free to contact us to verify whether these suggestions apply to your unique circumstances.

Further Reading

Have a question?

Share your analytical chemistry problem with our experienced team of scientists, including well-known spectroscopist Dr. Paul Gaines. Note that while we make an effort to respond to every question, customers of Inorganic Ventures are always given priority.
More Advice
Sample Preparation Chemical Stability and Compatibility Measurement and Results General Spectroscopy Guides and Papers
Fully ISO Accredited
Get the IV Line eNewsletter!
Custom Standards by Inorganic Ventures
Save up to 50% off at Inorganic Ventures
Follow Inorganic Ventures on Twitter!
Inorganic Ventures spectrum