Cart

Stability of Oil Standards, Organometallic Standards

Djaouida was curious about the stability of oil standards. First she wondered if water, as an impurity in the solvent, would be a problem. If so, she wanted to know how she could eliminate its effect upon the stability of organometallic standards. She also wanted to know what the best solvent for direct analysis of lubricating oils would be. Lastly, Djaouida asked how she might improve the stability of Silver for her applications.


Dear Djaouida,

The conventional problem with the stability of oil standards is a combination of trace water in the oil / solvent combined with a deficient quantity of organic acid needed to react with the metal forming a "soap". You might try adding some hexanoic anhydride. Otherwise, switch to xylene as the solvent. The xylene should be dried over three (3) Angstrom molecular sieves that themselves have been activated by heating to 300°C for three (3) hours. The xylene is a much better solvent for the lubricating oils and the drying will reduce the water content to insignificant levels, eliminating detectable hydrolysis.

The loss of Ag concerns me in that it may be that precipitation is occurring. Ag forms more insoluble precipitates than any other metal. It may continue to give you problems in spite of the changes I've recommended above.

Please contact me should you need further help.

Serving you in chemistry,
 

Paul R. Gaines, Ph.D.
CEO of Inorganic Ventures & Fellow Chemist

DISCLAIMER: Advice offered by the chemists at Inorganic Ventures is intended for the individual posing the question. Feel free to contact us to verify whether these suggestions apply to your unique circumstances.